Deployment of containerized applications, is the new norm. With it comes the need for automating the deployments, scaling them up to meet increased loads, and managing their lifecycle. Kubernetes (K8s) is one such utility that fills these needs. ▶
This article addresses the creation of an Armbian image using the mainline linux kernel 5.2.0-rc3, and the setup of the popular home automation software, Home Assistant. This exercise was performed targeting the popular Single Board Computer (SBC) ODROID-C1. ▶
This is a continuation of the Retro Gaming Console article from last month, where we learned how to build a case for a retro gaming console. This installment will show you how to configure the software for the project. In this article, I will show you in detail how to ▶
This code and guide are intended to demonstrate GPIO IRQ handling on the ODROID-C1+/C2/XU4/N2. The guide was adapted from the ODROID wiki page at https://wiki.odroid.com/odroid-xu4/application_note/gpio/rpi.gpio_irq. We can simply implement GPIO IRQ handler with Python 2/3. In this guide, we will use Python 3 for programming the handler. Before getting started, ▶
Hiding in plain sight in the powerful Hardkernel single board computer (SBC), the unassuming ODROID-C0. Slightly larger than a 3,000 mAh battery pack yet powered by a power-sipping Amlogic S805 System-on-a-Chip (SoC) featuring 1Gb of RAM, dual USB (2.0) ports, an eMMC interface, and a microSD storage card socket, this ▶
The Yocto Project (YP) is an open source collaborative project that helps developers create custom Linux-based systems regardless of the hardware architecture. Yocto is not an embedded Linux distribution, but it instead creates a custom one for you. ▶
This month, we feature a project using RAID storage to create a 6-bay Network Access Storage (NAS) device with an ODROID-H2. We also bring you part 2 of the ZoneMinder article from last month, demonstrating how to build the package from source code. There are lots of articles for gaming ▶
ZoneMinder is an integrated set of applications that provide a complete surveillance solution allowing capture, analysis, recording, and monitoring of any CCTV or security cameras. ▶
How to build a 6-Bay NAS server with ODROID-H2. ▶
This is a continuation of a guide for setting up Kodi with Mame, which details how to install the joystick. Ideally, playing with MAME requires a nice joystick. Here are two examples of joystick I've built myself. It's a good exercise of woodwork, painting, designing and electronics and a fun ▶
ODROID Magazine © 2019 Hardkernel, Ltd
