ODROID-C0

Implementing GPIO IRQ Handlers: Using Python 3 To Control RPi.GPIO

This code and guide are intended to demonstrate GPIO IRQ handling on the ODROID-C1+/C2/XU4/N2. The guide was adapted from the ODROID wiki page at https://wiki.odroid.com/odroid-xu4/application_note/gpio/rpi.gpio_irq. We can simply implement GPIO IRQ handler with Python 2/3. In this guide, we will use Python 3 for programming the handler. Before getting started,  ▶

ODROID-C0

Is That a Linux Computer in Your Pocket, or Are You Just Glad to See Me?: Build an ODROID Computer You Can Carry in Your Pocket

Fresh on the heels of the ODROID Tablet project, https://magazine.odroid.com/article/build-a-rootin-tootin-dual-bootin-odroid-tablet-using-the-odroid-c0-to-make-a-professional-grade-tablet-for-under-usd100/, comes an even more portable version of the ODROID-C0. Rather than sporting a large-scale HDMI-equipped LCD, this “pocket ‘puter” relies on a framebuffer-driven video output displayed on a 3.2-inch thin-film-transistor (TFT) touchscreen shield dubbed the C1. While this touchscreen shield  ▶